A very nice WWII period Mark 3 U.S. fighting knife with the blade deeply stamped, U.S. M3 CASE. The blade displays use and age. The handle and stacked leather grip are in good condition. The original scabbard is marked, U.S. M8 B.M. CO and in very good period used condition no major chips or cracks. There is a leather tie-down that has been braided at the end of the scabbard. This is the earlier scarce blade-marked version rather than guard-marked example.

The M3 fighting knife or M3 trench knife was an American military combat knife first issued in March 1943. The M3 was originally designated for issue to soldiers not otherwise equipped with a bayonet. However, it was particularly designed for use by elite or 'shock' forces in need of a close-combat knife such as airborne troops and Army Rangers, and these units received priority for the M3 at the start of production. As more M3 knives became available in 1943 and 1944, the knife was issued to other soldiers such as Army Air Corps crewmen and soldiers not otherwise equipped with a bayonet, including soldiers issued the M1 Carbine or submachine gun.

The M3 was manufactured by a number of U.S. knife and cutlery manufacturers during the war. Manufacturers known to have made the M3 under wartime
contract include the Aerial Cutlery Co., W. R. Case & Sons Cutlery Co., Imperial Knife Co., PAL Cutlery Co., Camillus Cutlery Co., Robeson (ShurEdge) Cutlery Co., Kinfolks Inc., Utica Cutlery Co., and H. Boker & Co.

The M3 was developed as a replacement for the World War I-era U.S. Mark I trench knife, primarily to conserve strategic metal resources. The prototype for what would become the M3 was evaluated in December 1942 by the civilian board of directors of the Smaller War Plants Corporation Board (SWPC) against another competing design, the US Marine Corps' 1219C2 fighting utility knife. However, while the specified priority steel supplies for both knives were available, the M3's lower production cost compared to that of the 1219C2 convinced the SWPC board of directors to approve the M3 prototype for quantity production.

Though the M3 had competed with the USMC 1219C2 for approval by the Army, the M3, unlike the Marine Corps knife, was not a dual-purpose weapon designed for both close combat (fighting knife) and general use (utility knife). As the U.S. Catalog of Standard Ordnance Items of 1943 clearly explained:

The Trench Knife M3 has been developed to fill the need in modern warfare for hand-to-hand fighting. While designated for issue to soldiers not armed with the bayonet, it was especially designed for such shock units as parachute troops and rangers.

The M3 was first issued to U.S. Army soldiers in March 1943, with the first knives going to elite units such as airborne troops and the U.S. Army Rangers. Despite ordnance descriptions of the knife as being designed for hand-to-hand warfare, the M3 did not receive universal praise as a close-quarters fighting knife upon issue to combat units. While the knife itself was generally well-made and balanced (some paratroopers and rangers mastered the art of using the M3 as a throwing knife), the long narrow dagger-like steel blade, designed to economize on priority steel requirements, was best used as a thrusting or stabbing weapon, and performed less well when used for slashing strokes.[4] Reports of blade failures on M3s in service increased as soldiers began to use their trench knives for ordinary utility tasks such as opening ammo crates and food ration tins, a role for which the M3 had not been designed. Some soldiers also found the M3's cutting edge to be difficult to maintain in the field. As issued, the blade's secondary or false edge was intentionally sharpened and beveled for only a portion of its length, leaving an unsharpened spine on the top of the blade in an effort to stiffen the relatively narrow blade. This limited the usefulness of the M3 when employed for backhand slashing strokes.

The M3 replaced the OSS dagger in service in 1944.

After U.S. Army ordnance began developing a proprietary bayonet for use on the M1 carbine, it was realized that the new carbine bayonet, which already incorporated the M3 blade design and leather-wrap grip, could also replace the M3 in service in a secondary role as a fighting knife. The carbine bayonet, now designated the Bayonet, U.S. M4, was added to the Company Table of Organization in June 1944, and the M3 was declared to be a limited standard ordnance item, with supplies to be issued until exhausted. Nevertheless the final M3 production run did not take place until August 1944, by which time 2,590,247 M3 trench knives had been produced.

At termination of production in August 1944, the M3 trench knife had one of the shortest production and service records of any U.S. combat knife. However, the M3's blade design continued in U.S. military service in the form of the U.S. M4, M5, M6, and M7 bayonets.

Item # DROL3177

Print email to a friend

---

Order Information

Please contact us if you have any questions before you place an order. 770-633-5034

Terms of Sale

All items are described to the best of our ability. Remember that the only true experts died 100 years ago. If we make a mistake we will make it right. It is always best to call and reserve an item as most of them are unique. We do out best to keep the web-site up-to-date but sometimes items sell out at a show and aren't removed immediately. After you place your order and receive confirmation from Dixie Relics. The item will be held for 7 days for the payment to arrive. If payment is not received within 7 days the item will be placed back for sale. Please call between 9:30 AM and 7:00 PM Eastern Time. A minimum charge of $8.00 will be added to cover shipping. Items can be shipped FedEx or USPS Priority Mail. Georgia residents must include 7% sales tax. All items are 100% GUARANTEED. If for any reason you are unhappy with the relic just return it UNALTERED within 5 days for a refund minus shipping charges and restocking fee of 6%. Layaways can be arranged on items over $100. Layaway terms are; 1/3 down and 1/3 in 30 days with balance due in full in 60 days. Due to time factors there are no refunds or price discounts on layaways. Only 1 item may be in lay-a-way at a time unless approved by Dixie Relics. We reserve the right to refuse service to rude people. We are always buying and trading so feel free to make an offer. Thanks for stopping by! Steve and Melody Strickland.

Payment Information

Checks, Money Orders , Major Credit Cards , Layaway

Authenticity

I guarantee all my items to be authentic and as described. All items are Guaranteed to be Authentic without time limit to the original purchaser for the price purchased as long as the item is accompanied by the original receipt or bill of sale.

Shipping Information

We use the United States Postal Service or FedEx for all shipping. Insurance is included in all shipping costs to protect your item. We am happy to combine items to reduce the shipping cost please let us know if you have placed multiple orders.

Copyright © 2019 Dixie Civil War Relics All Rights Reserved. Contact: info@dixierelics.com with questions or comments with this site. Use of this web site constitutes acceptance of the Dixie Civil War Relics User Agreement and Privacy Policy. For question

If you have ordered or are considering ordering an antique weapon or artifact from our website please be advised that these artifacts and antique weapons are sold strictly as collectible antiques.

We strongly recommends that these artifacts be enjoyed and appreciated for their historical significance and not ever fired. By ordering you are acknowledging these facts, warnings and assume full responsibility for your personal actions with regard to them.

We DO NOT sell modern firearms , all our inventory is pre 1898 and are classified by the ATF as antiques and require no government paperwork to own.